For years there seemed to be a single efficient method to keep data on a pc – having a disk drive (HDD). On the other hand, this type of technology is already demonstrating its age – hard disk drives are really noisy and slow; they are power–hungry and are likely to generate a lot of warmth throughout intense procedures.

SSD drives, on the contrary, are extremely fast, take in a lesser amount of energy and tend to be much cooler. They provide a completely new solution to file access and storage and are years ahead of HDDs in relation to file read/write speed, I/O performance and then power efficacy. Find out how HDDs stand up up against the newer SSD drives.

1. Access Time

SSD drives have a brand–new & revolutionary solution to file storage in accordance with the utilization of electronic interfaces rather than just about any moving parts and spinning disks. This different technology is much quicker, enabling a 0.1 millisecond data file access time.

The concept driving HDD drives goes back to 1954. And even while it has been considerably polished over time, it’s nevertheless can’t stand up to the imaginative ideas driving SSD drives. Having today’s HDD drives, the highest data access speed you can reach may differ in between 5 and 8 milliseconds.

2. Random I/O Performance

As a result of exact same revolutionary strategy which enables for a lot faster access times, you may as well experience improved I/O effectiveness with SSD drives. They’re able to accomplish double the procedures throughout a given time as compared with an HDD drive.

An SSD can handle at least 6000 IO’s per second.

Having an HDD drive, the I/O performance gradually raises the more you use the hard drive. However, just after it actually reaches a certain limit, it can’t proceed faster. And due to the now–old concept, that I/O limitation is significantly below what you might find with an SSD.

HDD can only go as far as 400 IO’s per second.

3. Reliability

SSD drives are lacking any sort of rotating parts, meaning there is far less machinery included. And the less actually moving parts you will discover, the lower the probability of failing will be.

The regular rate of failure of any SSD drive is 0.5%.

As we have previously documented, HDD drives use rotating hard disks. And anything that works by using plenty of moving parts for lengthy time frames is susceptible to failure.

HDD drives’ regular rate of failing can vary between 2% and 5%.

4. Energy Conservation

SSD drives are much smaller than HDD drives and also they lack just about any moving components whatsoever. It means that they don’t create just as much heat and need considerably less electricity to work and much less power for cooling purposes.

SSDs take in between 2 and 5 watts.

HDD drives are renowned for being loud. They want a lot more energy for chilling purposes. On a hosting server which has a multitude of HDDs running at all times, you need a lot of fans to make sure they’re cooler – this will make them much less energy–efficient than SSD drives.

HDDs use up in between 6 and 15 watts.

5. CPU Power

The swifter the data access rate is, the faster the data file queries will be processed. Therefore the CPU do not need to hold resources waiting around for the SSD to reply back.

The average I/O wait for SSD drives is just 1%.

When you use an HDD, you will have to invest more time watching for the outcome of your data file call. Because of this the CPU will stay idle for much more time, expecting the HDD to react.

The typical I/O wait for HDD drives is about 7%.

6.Input/Output Request Times

It’s time for several real–world illustrations. We ran a complete platform backup on a hosting server only using SSDs for data storage uses. During that procedure, the standard service time for any I/O query remained under 20 ms.

Using the same server, yet this time furnished with HDDs, the effects were completely different. The regular service time for an I/O query fluctuated in between 400 and 500 ms.

7. Backup Rates

You can actually notice the real–world potential benefits to utilizing SSD drives each day. For instance, with a server loaded with SSD drives, a complete back up is going to take merely 6 hours.

We applied HDDs mainly for quite a while and we have decent familiarity with just how an HDD performs. Generating a backup for a hosting server furnished with HDD drives can take around 20 to 24 hours.

With gemtechs, you can find SSD–driven website hosting solutions at good prices. The web hosting plans and our VPS servers incorporate SSD drives automatically. Get an web hosting account with us and observe the way your websites will become far better at once.

  • Service guarantees

  • Each of our Virtual Private Servers is configured for you at no charge. 99.9% network uptime. Full root and SSH access.
  • Compare our prices

  • Effortlessly compare the allocations and features supplied by our Virtual Private Servers. Find out which VPS setup gives you everything that you need to take care of your dynamic web presence effortlessly.
  • Compare our hosting plans
  • Contact Us

  • We are on duty for you 24 hours to resolve any kind of questions with regards to our VPS platform. 1–hour reply–back time frame warranty.